Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

Other

Specialized Turbo Levo Battery with Rock Guard
$900.00
The Custom Li-Ion Turbo Levo Battery has a 504Wh capacity and works with all Turbo Levo models. The battery also includes an ANT+/ Bluetooth module that enables the bike to work with the Specialized Mission Control App or any other ANT+ device. Lastly, it has a rock guard and all of the hardware required for installation. - Battery features a 504Wh capacity - Works for all Turbo Levo models - ANT+/Bluetooth module works with Specialized's Mission Control App and any other ANT+ device - Includes rock guard and all hardware
Shimano STEPS CITY E6010 Down Tube Battery
$586.99
- BT-E6010 (battery) / SM-BME61 (battery mount) - Consistent performance, minimally affected by weather and temperature - Long life design, greater than 1,000 charge cycles - BT-E6010 features easy mounting and release
Pro Missile EVO Clip-On Aero Extensions
$579.99
Missile EVO clip-on carbon aero extensions for triathlon and time trial cyclists. - For "under bar" and "top bar" mount - Wide adjustability of armpads and extensions for optimal ergonomic and aerodynamic positions - Wide and 1cm thick microfiber arm pads - Clamp diameter: 31.8mm
Shimano STEPS CITY E6000 Rear Carrier Battery
$569.99
- BT-E6000(battery) / SM-BNE60 (battery mount) - Consistent performance, minimally affected by weather and temperature - Long life design, greater than 1,000 charge cycles - BT-E6000 features integrated sense of design with carrier
Campagnolo Super Record/Record EPS V3 Power Unit
$480.00
The EPS Power Unit is the systems source of power as well as the "brain" of the system, responsible for managing the battery pack, enabling and monitoring the front and rear derailleurs and communicating with the Interface Unit. - Weathertight, o-ring sealed connectors - Lithium Ion battery duration: 500km/month - 1500km, 1000km/month - 1800km, 2000km/month - 2000km - Water proof to 1m for 30 minutes (IP67 Rated) - Operational temperature: -4F to 140F - Charging temperature: 32F to 113F - 17mm diameter for easy seat post installation - Battery charges through the Interface Unit - Compatible only with the Super Record/Record V3 Power Unit
Campagnolo Chorus EPS V2 Power Unit
$365.00
The EPS Power Unit is the brain of the entire EPS system. The power unit input/output gate charges the battery and updates the firmware. The unit checks and manages the battery pack, interacts with the interface, drives the front and rear derailleurs, and displays system anomalies through an acoustic buzzer and RGD light. EPS V2 Power Units are for internal battery applications, under bottom bracket, or under chain stay mounting options and require the specific EPS V2 Interface. - Weathertight, o-ring sealed connectors - Lithium Ion battery duration: 500km/month - 1500km, 1000km/month - 1800km, 2000km/month - 2000km - Water proof to 1 meter for 30 minutes (IP67 Rated) - Operational temperature: -4F to 140F - Charging temperature: 32F to 113F
SRAM RED eTap BlipBox
$330.00
SRAM's BlipBox is the control module that turns your triathlon or time trial machine into a wireless missile. Connected to SRAM RED eTap Blip remote shifters, the BlipBox manages the wireless shifting via AIREA, SRAM’s proprietary communication protocol, allowing immediate shifts from nearly any aero position. - BlipBox mount included - Replaces standard drop bar shift levers - Limitless aero configurations - Up to two positions per side - Fits a standard Garmin mount or the included mount
Campagnolo Super Record/Record EPS TT V3 Interface Unit
$300.00
In conjunction with the EPS Power Unit, the Interface is the "thinking" center of EPS and is responsible for on board diagnostics, managing settings, converting analog signal from Ergo Levers to digital and sending it on to the Power Unit maintaining a dialogue with the Power Unit. - Required for use with Record TT levers and/or Bare End shifter - Compatible only with the Super Record/Record V3 Power Unit - Weathertight, o-ring sealed connectors - Waterproof to 1m for 30 minutes (IP67 Rated)
Specialized ViAS Aero Clip-On Bars - ITU
$300.00
In a perfect world, you'd be riding Specialized's Shiv in any triathlon, but ITU plays by its own rules. Never fear, however, because Specialized's Venge ViAS is the most aerodynamic road bike out there. And with the ViAS Aero Clip-On Bars, you'll be able to dial-in your TT position while remaining in compliance with ITU regulations. - Find the perfect aerodynamic position on the fastest platform out there - Complies with ITU regulations - Only compatible with the ViAS cockpit
Specialized ViAS Aero Clip-on Bars - Tri/TT
$300.00
With the perfect position comes the perfect result, and with Specialized's ViAS Aero TT Clip-On Bars, you'll get all of the above. They're made exclusively for the ViAS cockpit found on the latest Venge, and they're longer than the ITU option, so you'll be able to achieve a full extension for the perfect fit and aero profile. - Find the perfect aerodynamic position on the fastest platform out there - Only compatible with the ViAS cockpit - Perfect length for both TT and triathlon use
Pro Missile EVO Ski-Bend
$299.99
Missile EVO ski-bend carbon aero extensions for triathlete and time trial cyclists. - For under bar and top bar mount - Wide adjustability of armpads and extensions for optimal ergonomic and aerodynamic positions - Wide and 1cm thick microfiber armpads
Zipp CeramicSpeed Bearing Kit: 30/60 88 Front Hub, 188 Rear Hub, and 30/60/S9 Rear Free Hub
$276.00
- Includes 61803 bearings and one grease syringe - Measurable wattage savings between 1.5 and 9 watts per bearing set, depending on the level and condition of your existing bearings - Note: 88 front and 188v9 rear hubs are on all 2014 and newer Zipp 202, 303, 404, 808 - One kit required for: Zipp 88, 30 and 60 front hubs Zipp 188v8 rear hubs Zipp ALL free hub driver bodies - These 61803 bearings are not interchangable with the 77/177 hub 61803 bearings
Zipp CeramicSpeed Bearing Kit: 30/60 Rear Hub
$276.00
- Includes 61903 bearings and one grease syringe - Measurable wattage savings between 1.5 and 9 watts per bearing set, depending on the level and condition of your existing bearings - Note: 88 front and 188v9 rear hubs are on all 2014 and newer Zipp 202, 303, 404, 808 - One kit required for: Zipp 188v9, 30 and 60 rear hubs
Zipp CeramicSpeed Bearing Kit: For Sub-9/Super-9 Hub
$276.00
- Includes 61803 (1) and 61903 (1) bearings and one grease syringe - Measurable wattage savings between 1.5 and 9 watts per bearing set, depending on the level and condition of your existing bearings - Note: 88 front and 188v9 rear hubs are on all 2014 and newer Zipp 202, 303, 404, 808 - One kit required for: Zipp Super-9, 900 tubular and Sub-9 disc rear hubs
Zipp CeramicSpeed Bearing Kit: Modified For 177 Rear Hub
$276.00
- Includes 61903 bearings and one grease syringe - Measurable wattage savings between 1.5 and 9 watts per bearing set, depending on the level and condition of your existing bearings
Zipp CeramicSpeed Bearing Kit: Modified For 77 Front Hub and 177 Rear Free Hub
$276.00
- Includes 61803 bearings and one grease syringe - Measurable wattage savings between 1.5 and 9 watts per bearing set, depending on the level and condition of your existing bearings - These 61803 bearings are not interchangable with the 88/188 hub 61803 bearings
Bontrager Speed Concept Mono Extension
$149.99 - $274.99
The OCLV Carbon Mono Bar Extension delivers an even more aerodynamic leading edge to Trek's drag-defying Speed Concept (Gen 2). These straight and S-Bend extensions are designed to be cut to length and have internal routing for standard or Di2 cables. - Designed specifically for 2014 Speed Concept - OCLV Carbon fiber mono extensions - Straight and S-Bend extensions are designed to be cut to length - Internally-routed for Di2 and standard cables - Designed to accept 22.2mm standard extensions
RockShox Reverb Tackle Box for A2, B1
$274.58
RockShox Reverb Service Kits - 12 of Each size Key, 3 Top Cap Assemblies, 10 Blue 1-Piece IFPs, 10 Foam Rings, 10 Inner Seal U-Cups, 10 Inner Seal Head Bushings, 10 Inner Seal Head O-Rings, 10 Strain Relief Barbs, 10 Remote Barbs, 10 Bleed Screws, 10 Air Valve Caps, 6 Seat Bolts and Nuts, 10 Main Piston O-Rings
Zipp Vuka Clip Aerobar with Vuka Carbon Extensions
$250.00
The Vuka Clip On is all about providing the ultimate in fit, security, and adjustability for you to be faster and more efficient in your triathlon or time-trial aero position. Offered in high-performance carbon fiber, in both above and below-bar configurations. Additional risers, armrests and aero accessories available for fine tuning and maintenance. - Diameter: 31.8 - EVO 70/110: Weight: 480g, Length: 360mm - Race: Weight: 480g, Length: 330mm
Profile Design Supersonic Ergo 35c
$244.99
The Supersonic bracket (previously know as the J5) is the first and premier model of the new generation Profile Design brackets. It offers easier adjustments and a greater fit range than anything that came before it. Pairing this bracket with the ergo armrest offers industry-leading fit options and greater comfort. With the 35c extensions, this aerobar is suited to riders who wish to adopt an aerodynamic arrowhead hand position. Performance - The Supersonic/Ergo platform is designed to give riders the freedom to find their best possible position with a huge range of independence adjustments. Fit Data - Armrest Offset: -85mm to -17.5mm in 7.5mm steps - Armrest Width: 124mm to 290mm in 18.5mm steps (With Extensions at 100mm) - Armrest Stack: 58.5mm (no riser kit) to 138.5mm in 5mm increments (With aftermarket Riser Kit) - There are 80 distinct position options achievable just by moving the armrests. Combine that with risers and this bar offers 1440 possible configurations. As a clip-on bar it is also possible to adjust the extension width and tilt easily. Origin The supersonic was the first of our generation brackets - resulting from careful analysis of the way riders use their aerobars and the adjustments that need to be made. The Ergo armrest is an integral part of the overall adjustability scheme. The dual-offset design (shared with Race and Boom armrest) gives the most precise adjustment range of any armrest on the market. This, along with the evenly curved shape, allows it to work well for the majority of riders. Extensions - Extension Shape: The 35c extensions offer a 35 deg ski bend shape. This facilitates a slightly turned-down wrist position to create a streamlined hand position. They are 400mm long and can be cut to size to suit nearly ever rider. They are drilled for rear-exit cable routing. - Bracket: Supersonic - Clamp Diameter: 31.8mm (26.0 w/Shims) - Armrest: Ergo / 10mm Pads - Armrest Width: 124mm to 290mm in 18.5mm steps (with Extensions at 100mm) - Armrest Offset: -85mm to -17.5mm in 7.5mm steps - Armrest Stack: The minimum is 58.5mm and the bracket is compatible with our existing risers which add up to 138.5mm stack with (70mm of spacers added)
Profile Design Supersonic Ergo 4525c
$244.99
The Supersonic bracket (previously know as the J5) is the first and premier model of the new generation Profile Design brackets. It offers easier adjustments and a greater fit range than anything that came before it. Paring this bracket with the ergo armrest offers industry leading fit options and greater comfort. Performance The Supersonic/Ergo platform is designed to give riders the freedom to find their best possible position with a huge range of independence adjustments. Fit Data - Armrest Offset: -85mm to -17.5mm in 7.5mm steps - Armrest Width: 124mm to 290mm in 18.5mm steps (With Extensions at 100mm) - Armrest Stack: 58.5mm (no riser kit) to 138.5mm in 5mm increments (With aftermarket Riser Kit) - There are 80 distinct position options achievable just by moving the armrests. Combine that with risers and this bar offers 1440 possible configurations. As a clip on bar it is also possible to adjust the extension width and tilt easily. Origin - The supersonic was the first of our generation brackets - resulting from careful analysis of the way riders use their aerobars and the adjustments that need to be made. - The Ergo armrest is an integral part of the overall adjustability scheme.The dual - offset design (shared with Race and Boom armrest) gives the most precise adjustment range of any armrest on the market. This, along with the evenly curved shape, allows it to work well for the majority of riders. Extensions - Extension Shape: The 4525c extensions offer a 45 deg lower and 25 deg upper section with a 7.5mm lateral shift per side. This allows the rider to choose between a low, short reach position or a high hands, stretched position for aerodynamics. They are 400mm long and can be cut to suit nearly every rider. They are drilled for rear-exit cable routing. - Bracket: Supersonic - Clamp Diameter: 31.8mm (26.0 w/Shims) - Armrest: Ergo / 10mm Pads - Armrest Width: 124mm to 290mm in 18.5mm steps (with Extensions at 100mm) - Armrest Offset: -85mm to -17.5mm in 7.5mm steps - Armrest Stack: The minimum is 58.5mm and the bracket is compatible with our existing risers which add up to 138.5mm stack with (70mm of spacers added)
Profile Design Supersonic Ergo 50c
$244.99
The Supersonic bracket (previously know as the J5) is the first and premier model of the new generation Profile Design brackets. It offers easier adjustments and a greater fit range than anything that came before it. Paring this bracket with the ergo armrest offers industry leading fit options and greater comfort. Performance The Supersonic/Ergo platform is designed to give riders the freedom to find their best possible position with a huge range of independence adjustments. Fit Data - Armrest Offset: -85mm to -17.5mm in 7.5mm steps - Armrest Width: 124mm to 290mm in 18.5mm steps (With Extensions at 100mm) - Armrest Stack: 58.5mm (no riser kit) to 138.5mm in 5mm increments (With aftermarket Riser Kit) - There are 80 distinct position options achievable just by moving the armrests. Combine that with risers and this bar offers 1440 possible configurations. As a clip on bar it is also possible to adjust the extension width and tilt easily. Origin - The Supersonic was the first of our generation brackets - resulting from careful analysis of the way riders use their aerobars and the adjustments that need to be made. - The Ergo armrest is an integral part of the overall adjustability scheme. The dual - offset design (shared with Race and Boom armrest) gives the most precise adjustment range of any armrest on the market. This, along with the evenly curved shape, allows it to work well for the majority of riders. Extensions - Extension Shape: The 50c extensions offer a 50 deg ski bend shape with a 7.5mm (per side) lateral shift. This allows a neutral wrist angle with the capability to fine tune the grip width. They are 400mm long and can be cut to suit nearly every rider. They are drilled for rear-exit cable routing. - Bracket: Supersonic - Clamp Diameter: 31.8mm (26.0 w/Shims) - Armrest: Ergo / 10mm Pads - Armrest Width: 124mm to 290mm in 18.5mm steps (with Extensions at 100mm) - Armrest Offset: -85mm to -17.5mm in 7.5mm steps - Armrest Stack: The minimum is 58.5mm and the bracket is compatible with our existing risers which add up to 138.5mm stack with (70mm of spacers added)
Profile Design T1 Plus Double Ski-Bend Carbon Aerobar
$224.99
The T1+ Carbon Aerobar extension offers multiple handgrip positions including a high angle resting hand position for improved aerodynamics and ergonomics. Anchored by the J5 bracket with the streamlined Inline Compression Clamp (ICC), this bar provides single bolt extension adjustment so that dialing in your fit is simple and easy. The updated offset bridge matched with the F40tt armrest gives the system enormous range of reach and width adjustability. For additional integration, an optional BTA bridge is available. Tech specs: - Bracket: J5 Bracket - Armrest: F40tt - Stack: 55mm – 125mm (w/Aftermarket Riser Kits) Reach: -9mm – -77mm (7.5mm Increments) - Width: 155mm – 296mm (Center to Center) - Extension Length Adjustment: 218 – 318mm (Center of Basebar to Tip) - Extension Length: 353mm - Extension Height: 90mm - Extension Angle: 50 degrees - Clamp Diameter: 31.8mm (26.0 w/Shims) - Weight: 585g
Profile Design T2 Plus Carbon
$224.99
T2 Plus Carbon Aerobars are designed for race-oriented riders looking for more aggressive ride positioning. The T2+ Carbon extension provides an S-Bend with a molded grip offering ergonomics while maintaining aerodynamics. Anchored by the J5 bracket with the streamlined Inline Compression Clamp (ICC), this bar provides single bolt extension adjustment so dialing in your fit is simple and easy. The updated offset bridge matched with the F40tt armrest gives the system enormous range of reach and width adjustability. For additional integration an optional BTA bridge is available. Tech Specs: - Bracket: J5 Bracket - Armrest: F40tt - Stack: 55mm – 125mm (w/Aftermarket Riser Kits) - Reach: -9mm – -77mm (7.5mm Increments) - Width: 155mm – 296mm (Center to Center) - Extension Length Adjustment: 215mm – 316mm (Center of Basebar to Tip) - Extension Length: 357mm - Extension Height: 41mm - Extension Angle: 0-degrees - Clamp Diameter: 31.8mm (26.0 w/Shims) - Weight: 585g
Profile Design T2+ Carbon Clip-on Aerobars
$224.99
Profile's T2+ Carbon Clip-on Aerobars feature carbon ergonomic S-bend extensions with 30mm of rise for lightness, durability, and a great fit. These clip-ons also boast Profile's F-35 anatomic armrests and their J4 brackets so that you have length, width and arm adjustments for easily achieving the perfect aero tuck.
Profile Design T3 Plus Carbon
$224.99
T3 Plus Carbon Aerobars with ergonomic drop-bend extensions allow for the widest variety of hand positions for individual comfort. The revised T3+ Carbon extension brings improved electronic and mechanical shifting cable management to this innovative wrist relief bend. Anchored by the J5 bracket with the streamlined Inline Compression Clamp (ICC), this bar provides single bolt extension adjustment so dialing in your fit is simple and easy. The updated offset bridge matched with the F40tt armrest gives the system enormous range of reach and width adjustability. For additional integration an optional BTA bridge is available. Tech specs: - Bracket: J5 Bracket - Armrest: F40tt - Stack: 55mm – 125mm (w/Aftermarket Riser Kits) - Reach: -9mm – -77mm (7.5mm Increments) - Width: 155mm – 296mm (Center to Center) - Extension Length Adjustment: 229mm – 335mm (Center of Basebar to Tip) - Extension Length: 376mm - Extension Height: 66mm - Extension Angle: 40-degrees - Clamp Diameter: 31.8mm (26.0 w/Shims) - Weight: 575g
Profile Design T4 Carbon
$224.99
Shallow ski-bend triathlon or TT carbon aerobars offer a single neutral wrist angle with low extension height for better aerodynamics. The revised T4+ Carbon extension brings improved electronic and mechanical shifting cable management to our proven ski-bend extension. Anchored by the new Supersonic (J5) bracket with the streamlined Inline Compression Clamp (ICC), this bar provides single bolt extension adjustment making dialing in your fit simple and easy. The updated offset bridge matched with the F40tt armrest gives the system enormous range of reach and width adjustability. For additional integration, an optional BTA bridge is available. - Bracket: Supersonic (J5) Bracket - Armrest: F40tt - Stack: 55mm - 125mm (w/ Aftermarket Riser Kits) - Reach: -24mm to -92.2mm (7.5mm Increments) - Width: 155mm - 296mm (Center to Center) - Extension Length Adjustment: 230mm - 337mm (Center of Basebar to Tip) - Extension Length: 378mm - Extension Height: 71mm - Extension Angle: 30° - Clamp Diameter: 31.8mm (26.0 w/Shims) - Weight: 638g
Profile Design T5+ Carbon Clip-on Aerobars
$224.99
Profile's T5+ Clip-on Aerobars are made of feathery light carbon fiber and feature super-shallow 15-degree ski-bend extensions with length, width, and armrest adjustments so you can easily find a perfect aero position. These clip-ons have Profile's J4 brackets for a low, aero arm position and their comfy, adjustable F-35 armrests.
Profile Design V2+ Carbon Aerobar Extensions
$219.99
The V2+ Carbon introduces a new extension paired with the new L2 bracket. The V2+ extension is built up on a variation of the T2+ extension bend, featuring a higher rise S-bend to compensate for the lower mounting position of the extensions. The low stack bracket places the extension below the basebar with a stack height of 2.25cm below the T-series aerobars. Combining the L2 bracket and F40TT armrest offers small incremental adjustments, producing our best ever reach and width range. - Bracket: L2 Bracket - Armrest: F40tt - Armrest Stack: 37.5mm - Armrest Reach: -31.85mm to -76.85mm (7.5mm Increments) - Armrest Width (C-C): 183.2mm to 294.2mm (100mm Ext. Width) - Extension Length Adjustment: 211mm to 343mm (center of basebar to tip) - Extension Length: 366mm - Extension Height: 84mm - Extension Angle: 10° - Clamp Diameter: 31.8mm (26.0 w/Shims) - Weight: 550g
Profile Design V4+ Carbon Aerobar Extensions
$219.99
The V4+ Carbon introduces a new extension paired with the new L2 bracket. The V4+ extension is a variation of the T4+ extension bend, featuring a higher-rise Ski-bend to compensate for the lower mounting position of the extensions. The clamp design places the extension below the basebar with a stack height of 2.25cm below the T-series aerobars. Combining the L2 bracket and F40TT armrest offers small incremental adjustments, producing our best ever reach and width range. - Bracket: L2 Bracket - Armrest: F40tt - Armrest Stack: 37.5mm - Armrest Reach: -31.85mm to -76.85mm (7.5mm Increments) - Armrest Width (C-C): 183.2mm to 294.2mm (100mm Ext. Width) - Extension Length Adjustment: 211mm to 343mm (center of basebar to tip) - Extension Length: 366mm - Extension Height: 84mm - Extension Angle: 30° - Clamp Diameter: 31.8mm (26.0 w/Shims) - Weight: 550g
Page 1 of 39 Next page