Filter By:

  • Show More Brands
  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

Shorts/Bottoms

Specialized 3L Tech Bibs
$450.00
When you're riding snow-covered trails, you're going to meet many of the same distinct issues that plague skiers and snowmobilers alike, and that's snow infiltrating your clothing. So when Specialized partnered with 686 to create a line of winter clothing, they thought, what better place to start than with the new 686 x Specialized Women's 3L Tech Bibs? Starting with the materials, they feature a three-layer woven fabric shell with the venerable infiDRY 20. Now, three layers might sound thick and cumbersome, but really, this material is no different than what's found on some of your favorite jackets or pants. Almost paper thin, the exterior layer handles wind and water resistance (20,000mm), while the intermediary layer consists of a highly breathable membrane (20,000gm2) that keeps vapor moving up and out of the bibs to eliminate any clammy sensations. Lastly, the interior layer is designed to be soft against the skin, greatly increasing the comfort of the piece as a whole. The end result? You're guaranteed to ride dry and with a consistent level of warmth and protection. Moving on to the construction, you'll find that all of the seams are fully taped and waterproof, while even the exposed zippers are treated to be water-resistant. Taking this a step further, the bibs also include leg gaiters with Lycra stretch panels and a bootlace hook. Together, this system works to keep snow and moisture from traveling up the pants. Meanwhile, however, the natural bib design with malleable elastic suspenders prevents snow from entering the suit at the waist—especially when paired with a jacket. And lastly, they built the 3L Tech bibs with a relaxed fit that accommodates layering, so you're always going to have a healthy amount of room for a full range of movement in the saddle. There's also a leg gusset with an invisible zipper closure, plus a rear SWAT pocket to house your ride essentials or nutrition while out on the trail. - Three-layer woven shell fabric with infiDRY 20 (20,000mm water-resistance / 20,000gm2 breathability) is light and airy, keeping you protected from the elements without sacrificing comfort or breathability. - Fully taped waterproof seams and water-resistant exposed zippers protect common points of water infiltration, keeping you dry and protected as you ride. - Leg gaiter with Lycra® stretch panel and bootlace hook creates a tight seal at the leg opening, which ensures that no snow or water will seep up the leg as you ride. - Ghetto Slit leg gusset with invisible zipper closure creates a full range of movement for your pedal stroke, while also bolstering the strength of the construction. - Rear SWAT pocket intuitively and securely houses your ride essentials. - Elastic suspenders allow you to dial-in the fit of the bibs and are soft against the skin in order to reduce the risk of chafing or abrasion. - Vented thigh pockets add extra ventilation to prevent heat buildup under hard efforts. - Quick release suspenders make entry and exit of the bibs a simplified affair. - Easy entry side zips allow you to get in and out of the bibs with ease. - Relaxed Fit is comfortable and loose against the body, allowing for ample layering underneath.
Fizik Link R1 Bull
$300.00
Link cycling shorts combine perfectly with fi’zi:k saddles to make the ultimate contact point between you and your bike – delivering optimum comfort and performance. Link clothing’s interface is designed to match with the profile of Snake, Chameleon and Bull saddles, both Regular and Large sizes, to suit the three rider profiles determined according to Spine Concept EVO. Spine Flexibility and Pelvic Rotation are inextricably linked to saddle comfort – and thus performance – and in turn to the Link shape you need. The Link R1 Bull is extremely lightweight at just 155g. It’s designed and cut for a racing fit, with the quick-drying woven fabric’s ergo-centric pattern supporting the muscles to improve riding experience and performance. The material’s density, thickness and module force are calibrated to offer the best compression and freedom of movements, with minimal seams for enhanced comfort. The 3D Molded chamois with seamless padding is shaped to align perfectly with the appropriate fi’zi:k saddle and works in conjunction with the shape and length of the garment that’s calibrated to deliver the best comfort and maximum performance when riding in the position identified by the Spine Concept EVO designation: Snake, Chameleon or Bull. For riders with low flexibility and high pelvic rotation while pedaling, the Link R1 Bull fits with fi’zi:k Bull saddles: Aliante Regular and Aliante Large. A Bull’s characteristic is to reach the handlebar by rotating their pelvis to compensate their low body flexibility. Pelvis rotation makes the rider’s sit-bones touch the saddle with a 10° angle, so Bull saddles’ shape is designed to match this angle and to create the most comfortable riding position. With its chamois made from a double 3D Ring Molding structure, the Link R1 Bull has a Seamless 3D Molded Cover. - Materials: Lightweight woven fabrics, engineered density and module force for best compression and freedom of movement. Quick dry, weldedseams. - Chamoise: Breathable, 3D moulded, seamless, designed for Bull saddles - Leg Gripper: welded grip stripe, seamless - Weight: 155 grams (size M)
Fizik Link R1 Chameleon
$300.00
Link cycling shorts combine perfectly with fi’zi:k saddles to make the ultimate contact point between you and your bike – delivering optimum comfort and performance. Link clothing’s interface is designed to match with the profile of Snake, Chameleon and Bull saddles, both Regular and Large sizes, to suit the three rider profiles determined according to Spine Concept EVO. Spine Flexibility and Pelvic Rotation are inextricably linked to saddle comfort – and thus performance – and in turn to the Link shape you need. The Link R1 Chameleon is extremely lightweight at just 155 grams. It’s designed and cut for a racing fit, with the quick-drying woven fabric’s ergo-centric pattern supporting the muscles to improve riding experience and performance. The material’s density, thickness and module force are calibrated to offer the best compression and freedom of movement, with minimal seams for enhanced comfort. The 3D Molded chamois with seamless padding is shaped to align perfectly with the appropriate fi’zi:k saddle and works in conjunction with the shape and length of the garment that’s calibrated to deliver the best comfort and maximum performance when riding in the position identified by the Spine Concept EVO designation: Snake, Chameleon or Bull. For riders with medium body flexibility and low pelvic rotation while pedaling, the Link R1 Chameleon fits with fi’zi:k Chameleon saddles: Antares Regular and Antares Large. Chameleons reach the handlebar combining the medium flexibility of their body with a 5° pelvic rotation. Their body weight is distributed across all the saddle-body contact surface, and Chameleon saddles are flat in the front and medial area, with a 5° angled part toward the rear to support the sitbones. With its chamois made from a 4-Density 3D Ring Molding built on a Super Air base Layer, the Link R1 Chameleon has a Seamless 3D Molded Cover.
Fizik Link R1 Snake
$300.00
Link cycling shorts combine perfectly with fi’zi:k saddles to make the ultimate contact point between you and your bike – delivering optimum comfort and performance. Link clothing’s interface is designed to match with the profile of Snake, Chameleon and Bull saddles, both Regular and Large sizes, to suit the three rider profiles determined according to Spine Concept EVO. Spine Flexibility and Pelvic Rotation are inextricably linked to saddle comfort – and thus performance – and in turn to the Link shape you need. The Link R1 Snake is extremely lightweight at just 155 grams. It’s designed and cut for a racing fit, with the quick-drying woven fabric’s ergo-centric pattern supporting the muscles to improve riding experience and performance. The material’s density, thickness and module force are calibrated to offer the best compression and freedom of movement, with minimal seams for enhanced comfort. The 3D Molded chamois with seamless padding is shaped to align perfectly with the appropriate fi’zi:k saddle and works in conjunction with the shape and length of the garment that’s calibrated to deliver the best comfort and maximum performance when riding in the position identified by the Spine Concept EVO designation: Snake, Chameleon or Bull. For riders with high flexibility and no pelvic rotation while pedaling, the Link R1 Snake fits with fi’zi:k Snake saddles: Arione Regular and Arione Large. Snakes do not rotate their pelvis when riding, but instead flex their spine in order to reach the handlebar. Most part of the rider’s weight will be carried by their sit bones. Snake saddles are long and flat to guarantee a precise matching between the rider’s seat bones and the saddle surface, and to allow the maximum freedom of fore and aft movement on the saddle. With its chamois made from a series of 3D Ring Moldings built on a Super Air Base Layer, the Link R1 Snake has a Seamless 3D Molded Cover.
Louis Garneau Course LGneer Race Cycling Bib
$299.99
Don't fear the cramp. Every road biker worth their salt has a couple of stories of hitting the wall, be that in competition or on a regular ride that was just that little bit too tough. The Course LGneer Race Bib won't rid you of those bad memories, but it will go a long way to making sure you don’t repeat the experience. Engineered to support your muscle function, it will improve your efficiency on the bike and let you get the most out of your body. Aero tweaks and touches, like laser-finished hems and near-seamless one-piece construction, will help you slice through the wind for the surest, least inhibited route to the finish. Garneau’s patented 5Motion chamois gives you multi-directional movement and zero compromise on comfort. Perforated memory foam is employed to reduce chafing and pinch points as you move around in the saddle – so you can keep chasing down the attacks even on the longest days in the saddle. Technical Details: - Bottoms Fabric : CB Lazer Rev: Its construction is developed to never shred. Its compressive quality maximizes muscular performance and recovery - Kite Mesh : Lightweight, ensures optimal moisture management and keeps you dry - LGneer: The most technical engineered fabric in the lineup that we have developed to help you beat your personal best as a racer or weekend warrior - Bottoms Fabric Technology: coldblack treatment reflects UV rays for cooling - Garment Feature Bottoms : Aero single-layer, laser-cut bottom - Bottoms Chamois: Built-in chamois - Bottom Inseam : 10.5"/ 26.5 cm - Bottoms Visibility Features: Back reflective accents - Alphamantis Aero Technology 5 Motion Chamois Compressive Fit
Pearl Izumi Men's PI / BLACK Bib Shorts
$250.00
We have invested years into research and development to bring you PI / BLACK. Our patented bonded-seam construction, combined with luxurious Italian Transfer PRO fabric and ground-breaking construction allows the material to follow your every movement. Our proprietary PI Dry technology adds permanent water shedding performance without sacrificing breathability. Wide sonic cut bib straps distribute pressure evenly across the shoulders, for a supportive barely-there feel. FEATURES: - Italian PRO Transfer fabric delivers balanced stretch and compression - PI Dry technology adds permanent water shedding all-weather performance - Fully bonded construction eliminates bulk for unparalleled next-to-skin comfort - PRO Escape 1:1 Chamois with floating top sheet design delivers unmatched comfort - Sonic-cut bib upper and leg openings for a smooth, seamless transition to skin - BioViz reflective elements for low-light visibility - 10” inseam size Medium Speed Shop: When it comes to faster, we just can't say no. We obsess over things like anatomic fit, aerodynamics, fabric innovation and much, much more. It's one thing to dream up an innovation. It's another to put it into action. Until a prototype meets our professional athletes' standards, it doesn't meet ours. And it's back to the drafting table until it does. 46% Nylon, 38% Polyester, 16% Lycra Elastane, Made in China
Pearl Izumi Men's Pursuit / BLACK Bib Shorts
$250.00
Developed through Pearl Izumi's athlete-centric Speed Shop program, the Pursuit / BLACK Bib uses the most compressive fabric of any short in Pearl Izumi's line to deliver unparalleled muscle support and chamois stability. Raw edge leg openings are sleek and low bulk for aerodynamic comfort, and the full silicone leg gripper keeps them firmly in place during the hardest efforts. - P.R.O. Transfer fabric provides incredibly balanced stretch and recovery for muscle support and comfort - Team Chamois with floating top sheet is designed to provide reliable, comfortable support, when riders are at the limit - P.R.O. Transfer Direct-Vent mesh bib upper provides excellent moisture transfer, odor resistance and dry time - Radio pocket on bib upper for storage - Laser cut leg openings with silicone print hold hems in place smoothly and without constriction - Sublimated graphics on legs - 10-inch inseam (size medium) - Body: 65% nylon  35% LYCRA elastane/UPF 50+ - Panels: 65% polyester  35% LYCRA elastane/UPF 50+ - Mesh: 86% polyester  14% elastane - Garment Weight (Size M): 188 g - Form Fit (refer to team size chart)
Pearl Izumi Women's PI / Black Bib Shorts
$250.00
Our patented bonded-seam construction, combined with luxurious Italian Transfer PRO fabric and ground-breaking construction allows the material to follow your every movement. Our proprietary PI Dry technology adds permanent water shedding performance without sacrificing breathability. Wide sonic cut bib straps distribute pressure across the shoulders for a supportive barely-there feel. The unique crossover strap design allows drop tail convenience. FEATURES: - PI Dry technology adds permanent water shedding all-weather performance - Unique v-strap drop-tail design for ultimate nature break convenience - Fully bonded construction eliminates bulk for unparalleled next-to-skin comfort - Sonic-cut bib upper and leg openings for a smooth, seamless transition to skin - Italian PRO Transfer fabric delivers balanced stretch and compression - W PRO Escape 1:1 Chamois with floating top sheet design delivers unmatched comfort - BioViz reflective elements for low-light visibility - 8.5” inseam size Medium Speed Shop: When it comes to faster, we just can't say no. We obsess over things like anatomic fit, aerodynamics, fabric innovation and much, much more. It's one thing to dream up an innovation. It's another to put it into action. Until a prototype meets our professional athletes' standards, it doesn't meet ours. And it's back to the drafting table until it does. 46% Nylon, 38% Polyester, 16% Lycra Elastane, Made in China
Louis Garneau Course Thermal Bib Shorts
$249.99
- Super Lite Dry: 2-ply, water-repellent and wind-breaking - HeatMaxx: 4-way stretch opaque construction knit with brushed back - Carbon-X Mesh: Made with carbon fibers, its compressive properties help blood circulation to increase resistance to fatigue. - Power Mesh: Four-way stretchability, extreme breathability and quick drying - 5 Motion Chamois - Weather: Chilly/Wind
Louis Garneau Course Thermal Bib Shorts
$249.99
When the temps get a bit cooler, Garneau's Course Thermal Bib Shorts will help you go the distance with premium comfort and support. The secret is Garneau's fabrics that retain body heat, repel water, and protect you from the wind, all while offering breathability and promoting muscular performance. The 7-panel construction conforms for an anatomic fit and Powerband thigh cuffs provide support and reduce pressure on your lower legs. The hours you spend in the saddle will fly by thanks to the 5Motion chamois that ensures long-lasting comfort. With reflective accents, stretch trim on the bib straps, and a comfort zip for easy pit stops, Garneau has thought of all the details!
Machines for Freedom Most Versatile Bib Pant
$244.99
Introducing the MVP. A totally new product that will change how you kit. This is not a winter cycling tight. This is not a knicker. This is the MVP: so good you might just bench your other players. The Most Versatile Pant is just that: versatile. It is an ankle-length bib pant designed to take you through long months of transitional weather. After all, the hottest weeks of summer and the coldest weeks of winter only last so long and often leave you wondering how to dress for the other 10 months out of the year. Perfect for SoCal winters, Norcal summers, and everything in between, the MVP is meant to be worn anywhere from 50-75 degrees F. We think dressing for the cooler months should be just as simple as dressing for summer: bibs or pants, jersey, and vest or jacket. Easy. Besides innovating how you kit up for a long ride, The MVP opens up a whole new world of wearing kit as off-the-bike attire. Riding to meet friends for coffee or dinner? The MVP transitions seamlessly to "real life" and might just have people asking where you got your new leggings. We think bike-style and life-style should be interchangeable. Features Features the same chamois and bodice-fit of your favorite Endurance Bib. - High-performance European fabric for ultimate moisture wicking. - Mesh inserts for ultimate breathability. - The same compression you love in your bibs creates a lean, streamlined silhouette. - Locking zippered ankles make the MVP easy to put on and still maintain compression around the ankle. - SPF 50 means the end to your tanline woes.
Machines for Freedom Endurance Bib Short
$234.99
The little black dress of your cycling wardrobe. Designed with the long-distance cyclist in mind, this bib short will be a staple in your closet. Game-changing compression means this bib will hold tight to your body, eliminating chamois shifting that can cause discomfort and making the dreaded sausage leg obsolete. Slimming panels create a lean silhouette and clean lines. Ever found yourself in a business meeting with a razor sharp tanline peeking out from your pencil skirt? Our Endurance Bib features a 7.5" inseam making tanlines easily hidden under most hemlines. Features - Highest quality Italian chamois sized for ALL sit bone widths, a wider center cushion for better support when riding in a more aggressive position, and carbon-fiber micro-fiber fabric to prevent bacterial build-up. Ultra high-density foam padding makes this suitable for your longest days. - High-performance European fabric for ultimate moisture wicking. - Leg band that provides staying power WITHOUT squeezing for a smooth body silhouette. - Figure-flattering cut. - Clean, classic design so you can wear with any team or club jersey.
Machines for Freedom Endurance Bib Tall Short
$234.99
We know there's no such thing as one size fits all. We're making it easier to find your perfect fit with the Endurance Bib - Tall. We took our Endurance Bib and added a 1.5" longer inseam designed for women with longer legs or who prefer a short that hits below mid-thigh. Same amazing compression, same figure-flattering bodice, longer leg. As always, these bibs are designed with the long-distance cyclist in mind and are sure to be a staple in your cycling wardrobe. Features - Highest quality Italian chamois sized for ALL sit bone widths, a wider center cushion for better support when riding in a more aggressive position, and carbon-fiber micro-fiber fabric to prevent bacterial build-up. Ultra high-density foam padding makes this suitable for your longest days. - High-performance European fabric for ultimate moisture wicking. - Leg band that provides staying power WITHOUT squeezing for a smooth body silhouette. - Figure-flattering cut. - Clean, classic design so you can wear with any team or club jersey.
Pearl Izumi Men's Summit AmFIB Convertible Pants
$225.00
A zip-off version of Pearl Izumi's warmest MTB pants adds the versatility of a quick conversion to a softshell short. Featuring AmFib softshell throughout for a combination of warmth, and wind and water resistance. Raw edge construction hides the locking zippers on the short legs and long ankle zippers allow the lower legs to be removed over shoes. Wear over your favorite liner short or full-length PI Dry tights for the ultimate adjustable winter combo. - ELITE AmFIB Softshell fabric offers wind and water protection - Thermal Fleece fabric with water-shedding PI Dry technology on back of knees - Snap front waist closure with zip fly - External waist adjustment - Two zippered security hand pockets and zipped cargo pocket - Ankle zippers allow for easy on and off - Tailored MTB specific fit - BioViz reflective elements for low light visibility Main: 41% nylon  41% polyester  13% lycra  5% polyurethane DWR finish
Pearl Izumi Men's P.R.O. Bib Shorts
$200.00
Crafted with long ride comfort at the top of the list, Pearl Izumi paired their most supportive and breathable P.R.O. Escape 1:1 Chamois with luxurious Italian P.R.O. Transfer fabric, to create a bib short that you will choose for your most important rides. Just seven carefully engineered panels are used to minimize seaming for a perfect contour to your body. Wide, laser-cut bib straps eliminate the need for additional binding for a barely there, yet supportive fit. The raw edge hems create a smooth transition from short to skin for a sleek, high performance look and feel, with a printed silicone gripper to hold it securely in place even during hard efforts. Features: - Luxurious Italian P.R.O. Transfer fabric provides balanced compression for ultimate comfort - P.R.O. Escape 1:1 Chamois with floating top sheet design delivers unmatched comfort - Seven panel design minimizes seams and maximizes body-contouring fit - Laser-cut leg openings with silicone leg grippers for a seamless transition to skin - Laser-cut bib straps provide superior next to skin comfort and a low profile feel - BioViz reflective elements for low-light visibility - 10.5" inseam
Pearl Izumi Women's P.R.O. Bib Shorts
$200.00
Crafted with long ride comfort at the top of the list, Pearl Izumi paired their most supportive and breathable Women's P.R.O. Escape 1:1 Chamois with luxurious Italian P.R.O. Transfer fabric, to create a bib short that you will choose for your most important rides. Wide, laser-cut bib straps eliminate the need for additional binding for a barely there, yet supportive fit, and the unique crossover strap design allows drop-tail convenience without the need for zippers or clasps. The raw edge hems create a smooth transition from short to skin for a sleek, high performance look and feel, with a printed silicone gripper to hold it securely in place even during hard efforts all day long. Features: - Luxurious Italian P.R.O. Transfer fabric provides balanced compression for ultimate comfort - Women's PRO Escape 1:1 Chamois is smooth next to skin, with a free floating, dynamic stretch top sheet and 3-layer suspension core for unmatched comfort - Unique v-strap drop-tail design for ultimate nature break convenience - Minimal seaming and raw-edge straps enhance fit and feel - Center front bib clip allows for customizable middle or side strap position - Silicone leg grippers hold hems in place without constriction - Laser cut raw edge leg hem construction for seamless transition to skin - BioViz reflective elements for low-light visibility - 8.5" inseam
Specialized Element Cycling Bib Tights
$200.00
Hitting the road and riding through the cold takes a special form of dedication and mental fortitude. In other words, it's hard enough to ride those base miles without having to worry about your gear while out on the road. And with this in mind, we built our Element Cycling Bib Tights to be your perfect training partner this winter. To start, they're partly made from one of the most protective, warming materials in the business—Element Soft Shell. This material is extremely wind- and water-resistant, and it's also highly efficient at wicking moisture away from the skin, while remaining soft against the skin and quite breathable. And to further protect against the cold, select panels of the tights are constructed from our insulating Therminal fabric. Both materials possess the perfect amount of stretch, which complements the articulated cycling cut of the tights. Essentially, this all adds up to a complete freedom of movement throughout the motions of cycling, and this equates to the elimination of any rubbing, pinching, or chafing. And to ease entry and exit of the tights, we've also included an eight-inch ankle zipper. The tights also ensure comfort via our Body Geometry Winter Chamois, which features a variable density construction that places just the right amount of support and padding where your body needs it—not where it doesn't. Additionally, the chamois has a brushed face, which is ideal for winter riding, as it provides a touch of added warmth and moisture management. - Element Soft Shell is a knit fabric with remarkable insulating properties, as well as being wind- and water-resistant and highly breathable. We've also included insulating Therminal panels in selective locations of the tights to further the overall warmth. - Articulated cycling fit is designed to complement the body throughout the positions and movements of cycling, which eliminates any unwanted pinching, rubbing, or chafing. - Ankle gaiter creates a tight seal with either shoes or covers, so cold air won't creep up the leg while you're riding. - Reflective elements increase your visibility to motorists in low-light conditions. - Body Geometry Winter Chamois is scientifically tested to provide all of the support, comfort, and warmth you need for long winter rides. - DeflectUV 50+ protects the skin against harmful UV rays.
Fizik Link R3 Bull
$199.99
Link cycling shorts combine perfectly with fi’zi:k saddles to make the ultimate contact point between you and your bike – delivering optimum comfort and performance. Link clothing’s interface is designed to match with the profile of Snake, Chameleon and Bull saddles, both Regular and Large sizes, to suit the three rider profiles determined according to Spine Concept EVO. Spine Flexibility and Pelvic Rotation are inextricably linked to saddle comfort – and thus performance – and in turn to the Link shape you need. The Link R3 Bull is extremely lightweight at just 185 grams. It’s designed and cut for a performance fit, with the quick-drying fabric’s pattern supporting the muscles to improve riding experience and performance. Its fit is, achieved using specific polyamide and elastane non-woven fabrics designed for high performance sports activities, provides the optimum blend of support with freedom of movement, with minimal seams for optimum comfort. The supportive chamois with seamless padding and breathable cover is shaped to align perfectly with the appropriate fi’zi:k saddle and works in conjunction with the shape and length of the garment that’s calibrated to deliver the best comfort and maximum performance when riding in the position identified by the Spine Concept EVO designation: Snake, Chameleon or Bull. For riders with low body flexibility and high pelvic rotation while pedaling, the Link R3 Bull fits with fi’zi:k Bull saddles: Aliante Regular and Aliante Large. A Bull’s characteristic is to reach the handlebar by rotating their pelvis to compensate their low body flexibility. Pelvis rotation makes the rider’s sit-bones touch the saddle with a 10° angle, so Bull saddles’ shape is designed to match this angle and to create the most comfortable riding position. With its chamois built on a supportive double-density foam Base Layer, the Link R3 Chameleon has a fully Breathable Cover for long-ride comfort and performance. - Materials: Specifically developed polyamide and elastan non-woven fabrics, reduced number of seams improve comfort and durability. - Chamois: Lightweight, breathable high performance chamois, designed for Bull saddles. - Leg Gripper: silicon printed elastic - Weight: 189 g (size M)
Fizik Link R3 Chameleon
$199.99
Link cycling shorts combine perfectly with fi’zi:k saddles to make the ultimate contact point between you and your bike – delivering optimum comfort and performance. Link clothing’s interface is designed to match with the profile of Snake, Chameleon and Bull saddles, both Regular and Large sizes, to suit the three rider profiles determined according to Spine Concept EVO. Spine Flexibility and Pelvic Rotation are inextricably linked to saddle comfort – and thus performance – and in turn to the Link shape you need. The Link R3 Chameleon is extremely lightweight at just 185 grams. It’s designed and cut for a performance fit, with the quick-drying fabric’s pattern supporting the muscles to improve riding experience and performance. Its fit is, achieved using specific polyamide and elastane non-woven fabrics designed for high performance sports activities, provides the optimum blend of support with freedom of movement, with minimal seams for optimum comfort. The supportive chamois with seamless padding and breathable cover is shaped to align perfectly with the appropriate fi’zi:k saddle and works in conjunction with the shape and length of the garment that’s calibrated to deliver the best comfort and maximum performance when riding in the position identified by the Spine Concept EVO designation: Snake, Chameleon or Bull. For riders with medium body flexibility and low pelvic rotation while pedaling, the Link R3 Chameleon fits with fi’zi:k Chameleon saddles: Antares Regular and Antares Large. Chameleons reach the handlebar combining the medium flexibility of their body with a 5° pelvic rotation. Their bodyweight is distributed across the whole saddle-body contact surface, and Chameleon saddles are at in the front and medial area, with a 5° angled part toward the rear to support the sit-bones. With its chamois built on a supportive dense foam Base Layer, the Link R3 Chameleon has a fully Breathable Cover for long-ride comfort and Performance. - Materials: Specifically developed polyamide and elastan non-woven fabrics, reduced number of seams improve comfort and durability. - Chamois: Lightweight, breathable high performance chamois, designed for Chameleon saddles. - Leg Gripper:silicon printed elastic - Weight: 189 grams (size M)
Fizik Link R3 Snake
$199.99
Link cycling shorts combine perfectly with fi’zi:k saddles to make the ultimate contact point between you and your bike – delivering optimum comfort and performance. Link clothing’s interface is designed to match with the profile of Snake, Chameleon and Bull saddles, both Regular and Large sizes, to suit the three rider profiles determined according to Spine Concept EVO. Spine Flexibility and Pelvic Rotation are inextricably linked to saddle comfort – and thus performance – and in turn to the Link shape you need. The Link R3 Snake is extremely lightweight at just 185 grams. It’s designed and cut for a performance fit, with the quick-drying fabric’s pattern supporting the muscles to improve riding experience and performance. Its fit is, achieved using specific polyamide and elastane non-woven fabrics designed for high performance sports activities, provides the optimum blend of support with freedom of movement, with minimal seams for enhanced comfort. The supportive chamois with breathable cover is shaped to align perfectly with the appropriate fi’zi:k saddle and works in conjunction with the shape and length of the garment that’s calibrated to deliver the best comfort and maximum performance when riding in the position identified by the Spine Concept EVO designation: Snake, Chameleon or Bull. For riders with high body flexibility and no pelvic rotation while pedaling, the Link R3 Snake fits with fi’zi:k Snake saddles: Arione Regular and Arione Large. Snakes do not rotate their pelvis when riding, but instead flex their spine in order to reach the handlebar. Most part of the rider’s weight will be carried by their seat bones. Snake saddles are long and flat to guarantee a precise matching between the rider’s seat bones and the saddle surface, and to allow the maximum freedom of fore and aft movement on the saddle. With its chamois built on a supportive dense foam Base Layer, the Link R3 Snake has a fully Breathable Cover for longride comfort and performance. - Materials: Specifically developed polyamide and elastan non-woven fabrics, reduced number of seams improve comfort and durability. - Chamois: Lightweight, breathable high performance chamois, designed for Snake saddles. - Leg Gripper:silicon printed elastic - Weight: 189 grams (size M)
Pearl Izumi Men's P.R.O. Pursuit Bib Shorts
$195.00
These bibs are specifically engineered to meet the demands of the pro peloton. High tech fabrics blend optimal muscle support with ergonomic comfort to keep your legs feeling fresh. - P.R.O. Transfer In-R-Cool fabric powered by coldblack provides reflective cooling with incredible muscle support - P.R.O. Pursuit 1:1 Chamois with smooth, dynamic stretch top sheet and inset high-density suspension foam to support key areas  - P.R.O. Transfer Direct-Vent mesh bib upper provides excellent moisture transfer, odor resistance and dry time - Laser cut leg openings with silicone leg grippers hold hems in place without constriction - Reflective elements for low-light visibility - 10-inch inseam (size medium) - Body: 65% nylon  35% LYCRA elastane/UPF 50+ - Technology: coldblack - Mesh: 88% polyester  12% elastane - Garment Weight (Size M): 168 g
Pearl Izumi Men's P.R.O. Pursuit Cycling Bib Tight
$195.00
Keep the elements at bay with tights designed to keep your legs warm, dry, and pedaling freely. Softshell panels protect key splash zones on the legs while thermal panels with water shedding PI Dry technology simultaneously offer ventilation, breathability, and weather protection. - P.R.O. level 3-layer Softshell Panels for wind and water protection in key areas - Lighter weight Softshell on lower legs for splash protection - Thermal fabric with water shedding PI Dry technology used on back of legs and bib upper - Premium P.R.O. Pursuit 1:1 Chamois with multi density foams for targeted support and maximum breathability - Non zippered, elasticized cuffs for comfort under shoe covers - Minimal raw edge straps on bib upper for layering comfort
Pearl Izumi Men's P.R.O. Pursuit Graphic Bib Shorts
$195.00
All the technological advances from the pro peloton, with graphics to match Pearl's P.R.O. Pursuit Speed Jerseys. Sublimated panels add pops of color while high tech fabrics provide optimal muscle support. New innovative leg grippers keep shorts comfortably in prime position, so you stay as fast as possible. - High end P.R.O. Transfer In-R-Cool fabric powered by coldblack provides reflective cooling with incredible muscle support - P.R.O. Pursuit 1:1 Chamois with smooth, dynamic stretch top sheet and inset, high-density suspension foam to support key areas  - P.R.O. Transfer Direct-Vent mesh bib upper provides excellent moisture transfer, odor resistance and dry time - Sublimated graphics on selected panels - Laser cut lower leg panels with silicone leg grippers hold hems in place smoothly and without constriction - Reflective elements for low-light visibility - 10-inch inseam (size medium) - Body and Graphic Panels: 65% nylon  35% LYCRA elastane/UPF 50+ - Technology: coldblack - Mesh: 88% polyester  12% elastane - Garment Weight (Size M): 170 g
Pearl Izumi Men's P.R.O. Escape Thermal 3/4 Tight
$185.00
Stay comfortable in mixed conditions with this over-the-knee 3/4 bib tight. Thermal Fleece with water-shedding PI Dry technology maintains warmth when riding in inclement weather. - Thermal Fleece fabric with water-shedding PI Dry technology for all-weather performance - P.R.O. Transfer Fabric on bib upper for superior comfort - Raw Edge construction on leg opening and bib upper for chafe-free performance - New P.R.O. Escape 1:1 Chamois with floating top sheet design delivers unmatched comfort - BioViz reflective elements for low-light visibility - 19-inch inseam length [size medium]
Pearl Izumi Men's Summit AmFIB Pants
$185.00
Pearl Izumi's warmest MTB pants are ready to help hardy riders push through the toughest conditions. Featuring AmFib softshell throughout for a combination of warmth, and wind and water resistance. Special Thermal panels on the back of knees add breathability and enhance pedaling performance, and PI Dry technology adds water shedding functionality. Zips at the lower leg are designed to fit securely over larger winter boots. Wear over your favorite liner short or full-length tights. - ELITE AmFIB Softshell fabric offers wind and water protection - Thermal Fleece fabric with water shedding PI Dry technology on back of knees - Snap front waist closure with zip fly - External waist adjustment - Two zippered security hand pockets and zipped cargo pocket - Ankle zippers allow for easy on and off - Tailored MTB specific fit - BioViz reflective elements for low light visibility Main: 41% nylon  41% polyester  13% lycra  5% polyurethane DWR finish Back of Knee: 56% nylon  30% polyester  14% LYCRA  PI DRY
Pearl Izumi Women's P.R.O. Pursuit Bib Shorts
$180.00
This women’s bibs offering is designed for all-out performance. High compression fabric and carefully tuned raw-edge leg openings deliver a sleek, barely there feel and optimal muscle support.  - P.R.O. Transfer In-R-Cool fabric powered by coldblack provides optimal cooling and reflective sun protection - Center bib clip allows for customizable front strap position - Minimal seaming and raw-edge hems enhance fit and feel - Silicone leg grippers hold hems in place without constriction - W’s P.R.O. Pursuit 1:1 Chamois is smooth next to skin, with a dynamic stretch top sheet and blended multi-density foam to move with the body in motion - Reflective elements for low-light visibility - 9" inseam (Size M) - Body: 65% nylon, 35% LYCRA elastane/UPF 50+ - Technology: coldblack   - Garment weight (Size M): 144g
Specialized RBX Pro Bib Shorts
$180.00
When it comes to choosing the perfect cycling bib shorts, comfort is everything. Whether you're going fast or just cruisin', it's important to know that you'll be comfy. For riders who want premium materials, superior fit, and technologies that you won't find anywhere else, the RBX Pro Bib Shorts are the jam. - Lightweight VaporRize knit fabric with XTRA LIFE Lycra fibers are strategically combined with both rigid and four-way stretch wovens to optimize compression and stability. Coffee Carbon mesh, meanwhile, is used on the lower back for moisture transfer and evaporation to keep you dry, cool, and comfortable over long rides. - Open suspender fit and bib construction are designed to keep the shorts up and in-place without constricting the upper body with excess materials and tight bindings. Stretchy elastic suspenders are extremely plush and soft against the skin, and they accommodate taller torso lengths with ease. A non-stretch sail cloth center back panel is laser cut for breathability and anchors the back of the shorts for added stability. - Three SWAT-inspired rear pockets are engineered into the back of the bibs to keep valuables, like ice cream money and keys, close to the body and safe. Two additional stretch woven pockets are placed on the lower legs for easy storage and access. All five pockets have clean bonded edges that stretch, recover, and accommodate contents with ease. These features are minimal, non-obtrusive, and highly functional when you need them. More importantly, they don't get in the way. - Silicone infused fabric cuffs provide a gently, secure hold on the legs in order to ensure the perfect, shift-free fit. - Deflect UV 50+ protects your skin from harmful ultraviolet rays. - Men’s 3D Road chamois adds unrivaled comfort by minimizing its total footprint and by keeping only what's structurally necessary. This removes pressure on nerves and soft tissue, while also maintaining optimal levels of support. - 10.5" inseam (size Medium, Regular Height)
Specialized RBX Pro Bib Shorts
$180.00
Watch the miles add up with Specialized's RBX Pro Bib Shorts. Cut from Specialized's VaporRize fabric for outstanding breathability and moisture transfer, these comfy shorts also sport panel construction and mesh bibs. They even feature Deflect UV 50+ sun protection and Coldblack technology that keeps dark clothing from heating up in the sun. Plus, Specialized's multi-density BG RBX Pro chamois and plush silicone elastic leg openings deliver all-day riding comfort. - VaporRize moisture transfer knit fabrics - Cold Fabric technology reduces surface temperatures on dark colors - Articulated cycling fit - Two SWAT Pockets built into rear of bib - Fold-over leg cuff with silicone print - Body Geometry RBX Pro Chamois - Deflect UV 50+ - 10" inseam (size medium)
Specialized SL Pro Bib Shorts
$180.00
Specialized isn't afraid to say that, when it comes to performance and comfort, their SL Pro Bib Shorts stack among the best in the business. They use the best available fabrics, a highly advanced chamois, and feature a level of fit that's second to none. When it comes to high-quality bib shorts, it all starts at the fabric. This meant that they utilized their ultra-soft and highly breathable VaporRize materials to provide the utmost in moisture management and support. In addition to this, they also implemented their Cold Fabric technology that reduces the surface temperature of the fabric, as well as a vent channel on the lower back that assists in increasing ventilation while also decreasing perspiration. Meanwhile, the fit has also been given a tremendous amount of detail. You'll find that it follows an articulated design in order to accommodate the movements and position of cycling. And to make sure that the fit holds, Specialized designed the leg openings around a silicone-infused fabric cuff that gently, yet firmly, holds the legs in place. Not only that, but the bib uppers feature a welded construction that's free from seams in order to eliminate unwanted friction, while also strongly holding the braces in place. The Body Geometry SL Pro chamois has padding with a multi-density design that varies the degree of support in perfect harmony with the body. And as a result, you'll find that it significantly reduces pressure on the soft tissue and nerves, creating a ride feel and degree of comfort that's nothing short of sublime. - VaporRize knit fabrics are soft, lightweight, and highly breathable, with an equal emphasis placed on moisture management in order to increase your comfort on long rides at high effort. - Cold Fabric technology reduces surface temperatures on dark colored fabrics to keep you cool without sacrificing style. - Welded bib upper construction reduces the need for seams in order to reduce friction and dial in the fit, while a center back vent channel prevents moisture buildup at one of the most problematic points of perspiration. - Articulated design ensures the perfect fit while in the riding position. - Silicone-infused fabric cuff provides a gentle, secure hold on the legs in order to ensure the perfect, shift-free fit. - Body Geometry SL Pro Chamois features multi-density padding to strategically reduce pressure on soft tissue and nerves, leaving you comfortable for long stretches in the saddle. - Reflective elements increase your visibility to motorists in low-light conditions - Deflect UV 50+ protects your skin from harmful, ultraviolet rays. - Tall sizing offered with additional inseam and bib strap length for larger riders. - 10.5" inseam (size Medium, Regular Height)
Specialized SL Pro Bib Shorts
$180.00
Specialized isn't afraid to say that, when it comes to performance and comfort, their SL Pro Bib Shorts stack among the best in the business. They use the best available fabrics, a highly advanced chamois, and feature a level of fit that's second to none. When it comes to high-quality bib shorts, it all starts at the fabric. This meant that they utilized their ultra-soft and highly breathable VaporRize materials to provide the utmost in moisture management and support. In addition to this, they also implemented their Cold Fabric technology that reduces the surface temperature of the fabric, as well as a vent channel on the lower back that assists in increasing ventilation while also decreasing perspiration. Meanwhile, the fit has also been given a tremendous amount of detail. You'll find that it follows an articulated design in order to accommodate the movements and position of cycling. And to make sure that the fit holds, Specialized designed the leg openings around a silicone-infused fabric cuff that gently, yet firmly, holds the legs in place. Not only that, but the bib uppers feature a welded construction that's free from seams in order to eliminate unwanted friction, while also strongly holding the braces in place. The Body Geometry SL Pro chamois has padding with a multi-density design that varies the degree of support in perfect harmony with the body. And as a result, you'll find that it significantly reduces pressure on the soft tissue and nerves, creating a ride feel and degree of comfort that's nothing short of sublime. - VaporRize knit fabrics are soft, lightweight, and highly breathable, with an equal emphasis placed on moisture management in order to increase your comfort on long rides at high effort. - Cold Fabric technology reduces surface temperatures on dark colored fabrics to keep you cool without sacrificing style. - Welded bib upper construction reduces the need for seams in order to reduce friction and dial in the fit, while a center back vent channel prevents moisture buildup at one of the most problematic points of perspiration. - Articulated design ensures the perfect fit while in the riding position. - Silicone-infused fabric cuff provides a gentle, secure hold on the legs in order to ensure the perfect, shift-free fit. - Body Geometry SL Pro Chamois features multi-density padding to strategically reduce pressure on soft tissue and nerves, leaving you comfortable for long stretches in the saddle. - Reflective elements increase your visibility to motorists in low-light conditions - Deflect UV 50+ protects your skin from harmful, ultraviolet rays. - Tall sizing offered with additional inseam and bib strap length for larger riders. - 10.5" inseam (size Medium, Regular Height)
Page 1 of 15 Next page