A waterproof, bikepacking-inspired / urban-inspired seat pack bag that is quickly attached/removed via an ingenious quick-release seatpost mounting system. Ideal for the commuting trunk bag user who doesn’t want to use a rack. - OCEANWEAVE 600D reclaimed fishnet polyester with waterproof polyurethane coating. - HYDRACORE liner provides an exceptional IPX5 waterproof rating. - Universal Rixen & Kaul CONTOUR MAX seatpost bracket with 2 sets of seatpost clamps. (25-32mm & 32-36mm) – 3kg load rating (not including bag weight). - 8mm Engineered aluminum frame provides stiffness and load stability. - *Not advised for carbon fibre or ultra-lightweight seatposts. - Intuitive waterproof roll-down closure system provides flexible load management. - Front external mesh pocket with Velcro closure. - Outer bungee system with wings, allows excess gear to be carried outside of the main cavity. Ideal for unplanned loads faced by commuters. - Ultra-visible three-way 3M triangle logos. - Polypropylene side stiffeners and dimensional foam top/bottom stiffeners provide additional load stability. - Supplemental rear closure strap system provides additional support. - Built-in U-lock holder. - Rear light clip. - Volume 12L / 732 cu/in - Weight 795g / 1.75 lbs (incl. bracket), 725g / 1.6 lbs (without bracket) - Dimensions 44x18x16-inches / 17.3-inches x7.1-inches x6.3-inches
Brooks is proud to announce the fruit of their successful collaboration with the Royal College of Art in London (RCA). For the first time a new range of molded leather bags will be produced in the Brooks saddle factory in Smethwick, England, using the same machinery and techniques employed to make famous Brooks Leather Saddles. The shape is based on the width of the famous B17 saddle, Brooks' most iconic model, for the B1 and B2 bags, and twice that width for the larger B3 edition. The B1 can be fitted on the bike by attaching the bag to the saddle loops, or the bag may also be worn on a belt, or as a shoulder bag thanks to the detachable strap that accompanies it. - Width: 170mm - Height: 210mm - Depth: 70mm - Weight: 380 grams - Volume: 2.5L
$160.00 - $175.00
Get ready for your next bikepacking adventure! As a key item in your bikepacking setup, the Ortlieb Seat-Pack comes with Velcro straps to enable convenient and secure mounting to your seat stem. Projecting backwards from the seat stem, your Seat-Pack also serves as a rear fender. The spacious, waterproof Seat-Pack keeps its contents (e.g. an extra set of clothes) safe and dry. Depending on how long you plan to be away and your Seat-Pack model, you can conveniently adjust the volume of your pack from 8 to 16.5 liters or from 7 to 11 liters by adjusting the roll closures on the sides. An additional valve allows you to quickly and easily compress your soft gear for a more compact fit. Your Seat-Pack also serves as a replacement backpack when you're out on a day trip, no matter whether you ride a hybrid bike, a mountain bike, a road bike or an electric mountain bike. Thanks to its elastic drawstrings on the top, the 16.5-liter model offers additional space for items you need to be able to access quickly. This model needs only 15 centimeters of space on your seat stem. The smaller of the two models needs only six centimeters on your seat stem. That's why the more compact model is ideal for smaller frame sizes, full suspension bikes and adjustable seat stems. - Compact, waterproof saddlebag with roll closure - Ideal for bikepacking, alp-crossing, touring - Ideal for small bicycle frames and full suspension mountain bikes - Light weight sturdy PU laminated rip stop nylon - Air release valve to easily purge the bag of trapped air, allowing for tighter compression - Heavy-duty fabric used at the saddle rail mounting location - Heavy-duty hook and loop fasteners with a soft grippy surface ensure slip-free seat post fixation - Sturdy PE inner stiffener - Saddlebag acts as mudguard - Can be mounted to carbon seat posts - 3M Scotchlite reflectors - Suitable for round seatposts with a diameter of max. 31.8 mm - Maximum capacity 3 kg/6.6 lbs.
The Millbrook is an original Brooks bag design from the 1950's. Its design is intended for use on the handlebar, though it is also quite suitable for duty as a saddlebag. Items such as cameras, maps, small tools, and snacks are conveniently held before the rider, enabling easy access while on tour. Made from bluesign-certified textiles and genuine Brooks Leather, the storage compartment of the Millbrook also contains a handy leather-trimmed strap which, when removed, connects easily via tenax fasteners to the exterior panels, converting from handlebar to shoulder bag in an instant. - Width: 220mm - Height: 165mm - Depth: 165mm - Volume: 5L
Blackburn developed the Outpost Elite Universal Seat Pack (USP) to work with dropper or standard seatposts, be able to carry a bevy of cargo, and be stable enough to not swing around. The USP is a two part system: Part 1 is a T6061 Alloy Wing that affixes to your saddle and works with a standard or dropper post. Part 2 is a removable and waterproof dry bag. The bag has a scuba style air bleed valve to assist with compression while off the bike. The wing stays on the bike, the bag comes off and allows you to pack, compress and go ride in the snap of a few buckles. Blackburn carefully considers what is put in each of their bags and tailors the compartments, pockets, and other features to make sure there is a perfect place for everything. - Compatible with fixed or dropper seat posts - Wing mount keeps your load from swaying during pedaling - Removable dry bag features a purge valve to allow for full compression when packing - An external shock cord will allow you to carry wet gear, or flip flops outside the bag - Weight: 572g - Capacity: 10.5L
The Expedition Saddle Pack is lightweight, waterproof, and provides a spacious compartment under the saddle, eliminating the need for a rear rack. It’s designed to hold clothes and equipment on long distance rides. Built from a lightweight laminate developed specifically for Apidura, the Pack is highly resistant to abrasions and tears. The seams have been welded together, creating a waterproof seal that ensures contents always stay dry, even in sustained rain. A three-point attachment system with Hypalon-reinforced Velcro straps allows the Pack to hug the seat post, increasing stability and cutting down on lateral movement. Additional Hypalon on the Pack’s body keeps frames in good condition. The roll-down compression and closure system means the Pack’s volume can be tailored precisely to fit a range of packing needs. Materials The Expedition Saddle Pack is cut from a three-layer laminate fabric that was developed specifically for us. The material is lightweight, and is highly resistant to tears and abrasion. Notably, it’s welded together at the seams, creating a watertight seal that ensures complete waterproofing. The Pack’s attachment points are reinforced with Hypalon, a rubberized nylon used to provide extra protection against friction and abrasion. For the straps, Woojin buckles have been chosen for their strength and reliability. Finally, a lightweight moulded section of HDPE thermoplastic sits in the Pack’s lower section to reinforce its structure.
The Racing Saddle Pack is the first rear pack dedicated to ultra-distance competition and audax. Featuring a sleek design with a compact capacity, the Pack is ideal for storing light, compressible items over vast distances. Constructed from an ultralight, waterproof laminate developed for Apidura. The Pack weighs less than 210g and securely fastens with a sturdy three-point attachment system. It’s designed to fit ergonomically under the saddle, minimizing sway and reducing drag. Light attachment points are laser-cut into the fabric, increasing rider safety without adding unnecessary weight. A high-contrast reflective feature is specially designed to enhance visibility in all light conditions. A roll-top closure provides adjustable capacity, and tailored webbing, straps and buckles shed extra weight, while ensuring the simplest setup for ease of use, when every second matters. Materials The Racing Saddle Pack is made from Hexalon, a bespoke laminated fabric developed specifically for Apidura. Designed to fit the demands of ultra-distance competition and audax, the material is waterproof and lightweight, with strong tear and abrasion resistance. The attachment points are reinforced with Hypalon, a durable rubberized nylon that provides extra protection against friction and puncture. For the fastening system, we’ve chosen Woojin buckles for strength and reliability.
Specialized's Burra Burra Stabilizer Seatpack 20 is the largest in their line, which means that you can say goodbye to the cumbersome weight and handling of integrated rear racks. Instead, it affixes to your seatpost via an engineered aluminum stabilizer arm that minimizes any bouncing or side-to-side swaying under load. The pack itself features a welded roll closure design that's highly resistant to inclement weather, while its larger size (55x19x10cm) makes it ideal for mid to larger sized frames. - Welded construction with a secure roll closure opening ensures reliable weather resistance and long-lasting durability. - Engineered aluminum stabilizer arm minimizes bouncing and shifting for more secure, comfortable transport. - Urethane-coated YKK zipper pocket is designed to be highly weather resistant for dry storage of your smaller items. - Reflective accents increase your visibility to motorists in low-light conditions. - Stabilizer compatible with 27.2mm and 30.9mm seatposts. - Please note that this is not compatible with either dropper or carbon seatposts. - Dimensions (cm): 55 x 19 x 10 - Weight: 450g
The Brooks Challenge Large Tool Bag is a saddle bag for fitment to the rear of a saddle bearing bag loops or over the handlebars. It features buckles located within the hold itself to ensure greater security while the strap that closes the unit encircles the bag's contents, preventing them from rattling during transit. The first Challenge was designed and patented in 1896. The Challenge Large has a lot in common with its distinguished predecessors, but now features triple the volume! - Width: 210mm - Height: 110mm - Depth: 70mm - Volume: 1.2L
$124.99 - $133.99
The quintessential bikepacking bag for the great outdoors. The Backcountry Saddle Pack is an essential partner for bikepacking trips in the wilderness. Designed to hold light, compressible clothes and gear on off-road rides, the Pack provides a spacious compartment under the saddle, eliminating the need for a rear rack. It’s held securely by a stable three-point attachment system, ensuring maximum comfort. The all-weather fabric offers unparalleled resistance to abrasion and tears, and it’s also simple to pack down. There’s a bungee cord for spare clothing, while reflective graphics and two light attachment points mean that there’s no need to compromise on safety. The roll-down compression and closure system mean the Pack’s volume can be tailored precisely to fit a range of packing needs. The Backcountry Saddle Pack is made from Dimension-Polyant VX21, a four-layer laminated fabric originally developed for the maritime industry. Designed to fit the demands of off-road riding, the material combines waterproofing, light weight, low stretch, and high abrasion and tear resistance. The base of the Saddle Pack and Velcro straps are reinforced with Hypalon, a durable rubberized nylon that provides extra protection against friction and puncture. For the compression straps, Woojin buckles have been chosen for their strength and reliability. A lightweight molded section of HDPE thermoplastic sits in the lower section of the Saddle Pack to reinforce its structure.
With Specialized's Burra Burra Stabilizer Seatpack 10, you can say goodbye to the cumbersome weight and handling of integrated rear racks. Instead, it affixes to your seatpost via an engineered aluminum stabilizer arm that minimizes any bouncing or side-to-side swaying under load. The pack itself features a welded roll closure design that's highly resistant to inclement weather, while its smaller size (50x16x10cm) makes it ideal for smaller frames with tight wheel clearances. - Welded construction with a secure roll closure opening ensures reliable weather resistance and long-lasting durability. - Engineered aluminum stabilizer arm minimizes bouncing and shifting for more secure, comfortable transport. - Smaller size is ideal for the tight rear wheel clearances of smaller frames. - Stabilizer is compatible with 27.2mm and 30.9mm seatposts. - Please note that this is not compatible with either dropper or carbon seatposts. - Reflective logo accent increases your visibility to motorists in low-light conditions. - Dimensions (cm): 50 x 16 x 10 - Weight: 415g
The D-Shaped Bag was featured in Brooks Catalogues as far back as 1910. This innovative design features a two piece construction–while the outer sleeve remains permanently attached to the saddle, the bag has an inner purse that may be removed so that its owner may retain it, thus securing its valuable contents. The purse is attached to the sleeve by a "Sam Browne" fixing, preventing it from sliding out, even under extreme conditions. - Width: 165mm - Height: 110mm - Depth: 50mm - Volume: 0.4L
Blackburn's Outpost Seat Pack w/Dry Bag is a great alternative to panniers or a backpack. It is ideal for mountain bike overnight trips, but also works well for commuting or long day trips. - Expandable - Sometimes you need more space, while other times you need less. This bag expands to accommodate both. - Bag Fit - Bikes come in a lot of shapes and sizes. This bag includes adjustable mounting systems to allow fitment to almost ANY bike. - Also works with many standard dry bags and stuff sacks. Not recommended for carbon seatposts. - Daisy chain loop webbing provides extra opportunities to attach lights or other gear. - Volume 11.0 liters / 671 cu/in - Weight 1.33 lbs
Hilo Integrated Speed Storage mounts directly to the Hilo Pro or Comp saddle to add a verstatile storage component to your TT or Tri bike. Multiple configurations enable storage for one or two water bottles, tube or tubular, as well as multi-tool, tire levers, and CO2. Best of all, the design works with the bike and rider's aero profile to minimize drag. - Attaches to Hilo Pro or Comp saddle for aerodynamic water bottle and accessory storage - Securely holds CO2, inflator, and lever in compact accessory bag - Adaptable strap can be easily set up to hold spare tube or tubular tire - Secure aerodynamic mounting for up to two water bottle cages
The EXP Series Seat pack keeps gear high, centered, and in line with you and your bike. Much like a dry bag or stuff sack, the EXP Series Seat pack fits a wide range of load sizes, and dutifully carries anything you need on your next two-wheeled mission. - Water-resistant welded construction with waterproof fabrics - Roll type closure and air purging valve that allows for managing overall volume - Stretch cord storage on top - Durable 1000D material strategically placed in high wear areas - Weight: 380g - Capacity: 6 – 14 Liters
Ortlieb's Seatpost-Bag is an easy way to add extra carrying capacity to your bike. Tool-free mounts make it easy to get on and off, and switch from bike to bike. The roll-top closure makes it sealed from the weather and splashes, and allows for tight packing. The whole thing is made from waterproof nylon and Cordura, and even acts like a fender, keeping your back muck free. It's available in two sizes, the small one being suitable as additional bag for longer trips, the large version might even replace a backpack.
Oceanweave 600D reclaimed fishnet polyester with waterproof polyurethane coating. - Heavy-duty seat rail buckle and straps pull up to tighten. - 3 rubberized modular seatpost straps with Camlock ensure things stay tight while eliminating potential damage to clothing. - Top mount bungee system with wings provides optimum stability to top loads etc. - Top bungee system for additional flexible storage. - Supplemental rear closure strap system provides additional support. - Ultra-visible rear 3M triangle logo. - Polypropylene plates below saddle ensure ample leg clearance even if heavily loaded. - Built-in U-lock holder and rear light clip.
The first Brooks Challenge was designed and patented in 1896. This tool bag is for fitment to the rear of saddle bearing bag loops. It features buckles that, while fastening the bag to the saddle, are located within the hold itself, thus ensuring greater levels of security. The strap that secures the unit encircles the tools it carries to prevent them from rattling during transit. - Width: 175mm - Height: 78mm - Depth: 45mm - Volume: 0.5L
The Hauler Bike Packing Bag is a convertible saddle/messenger bag that is lightweight and versatile for each rider. It’s an easy way to carry a substantial amount of cargo to keep on your bike without wearing a pack and can be used as a messenger once you’re off to work, school, or play. NOTE: Photos of bags may not reflect the actual color. Each one is made with Upcycled Nylon, so colors and prints will vary. Materials: - Upcycled Colored Fabrics - Nylon Teeth with Zinc Zipper - 10 oz Vinyl Waterproof Tarp - Nylon Fabrics - Hook & Loop - Nylon and Metal Hardware - Dimensions: 9 L x 5 H x 22 D in./228 x 127 x 558 mm - Capacity: 990 cu in./16.2 L - Weight: 17.6 oz/498.9 g Features: - Universal hook & loop mounting straps - Roll-Top design excludes the need for zippers - Easy access front pockets - Frame plate secured all side to protect cargo - Straps are minimized for cyclists safety - Built in Colorado - Made in the USA - Limited Lifetime Warranty
$74.95 - $89.95
Listen to your inner voice of adventure. Pack up your gear, get on your bike, and ride that epic trail. BackLoader is a large-capacity seat bag specially designed for bikepackers providing a streamlined way to carry gear without the need for a rear rack. Constructed of lightweight, highly water-resistant and durable materials, it mounts and removes quickly. The upgraded saddle mount system, in conjunction with compression straps, reduces the pendulum effect associated with large rear payloads, providing a comfortable ride for those long miles. An easy-access waterproof inner bag is included to keep contents completely dry. - Polyethylene / Nylon — Lightweight, durable, water repellent and stain resistant - Hook and loop fastener - Waterproof Rating: 10,000mm (waterproof inner bag) - Max Load: 5kg / 11lb - Safety light clip - Air release button
The Packer Bag is the perfect seat bag with all the extra room needed for carrying the essentials. The Packer is the perfect accessory for commuting, bike packing, touring, mountain biking, road biking. - Roll up style closure with quick release buckles - Shock cord for mounting extra gear on top of the bag - Reflective accents and light holder - Water resistant 840 denier nylon/TPU - 18” x 7” x 6” - Up to 750 cubic inches
The Mountain Wedge 3 was designed for the rider who needs the capacity of a Jandd Rack Pac but doesn't want to bear the weight and cost of a rack. - HDPE stiffener around the entire bag, and an aluminum alloy stay that runs across the top of the bag to eliminate sag or sway - Five-point suspension with a hook-and-loop seat post strap; two webbing and cam buckle straps secure the bag to the seat rails, and for additional stability, two bungees fix the bottom to the rear braze-ons - Made of Dupont Cordura - 3M reflective trim - Expanded Dimensions: 9 x 11 x 7 inches - Weight: 440 grams - Capacity: 456 cubic inches
The Isle of Wight Saddle Bag is a smart, practical bag to accompany the rider on every journey. Constructed from waterproof bluesign material and genuine Brooks Leather, the bag features a unique double zip for easy access to your valuables, with room enough for multi tools, and an innertube. - Width: 100mm - Height: 110mm - Depth: 180mm - Volume: 1.2L
Not only does Banjo Brothers' Minnehaha Canvas Saddle Bag give you huge carrying capacity, it classes up any ride. You can pack a picnic and extra clothes while the 3-point attachment and hardwood internal support keep the load stable. The main panel of the bag boasts a durable, layered 18-ounce canvas construction and the bottom is reinforced with a riveted plate to keep your bag from sagging under load. Clever details include detachable reflective tabs, an interior wallet pocket and exterior lashing points so you can attach a jacket or walking shoes.
The Medium Packer Seat Bag is the perfect seat bag with all the extra room needed for carrying the essentials. The Packer is the perfect accessory for commuting, bike packing, touring, mountain biking, road biking. - Roll up style closure with quick release buckles - Shock cord for mounting extra gear on top of bag - Reflective accents and light holder - Water resistant 840 denier nylon/TPU - 16” x 6” x 5” - Up to 550 cubic inches
The EXP Series Seatpack keeps gear high, centered, and in line with you and your bike. Much like a dry bag or stuff sack, the EXP Series Seat pack fits a wide range of load sizes and dutifully carries anything you need on your next two-wheeled mission. - Water-resistant welded construction with waterproof fabrics - Durable 500D coated nylon material strategically placed in high wear areas - Roll type closure with buckle for managing overall volume - Adjustable seat rail mounting strap included - Weight: 184g - Volume: 3L
An ultra-high-volume under-the-seat bag and water bottle pocket designed specifically for the gran fondo cyclist. Every Seymour bag is created using Oceanweave – Axiom’s new lightweight and durable fabric made from reclaimed fishnet – to help reduce the amount of harmful plastics in our oceans. CONSTRUCTION - OCEANWEAVE 600D recycled fishnet polyester with waterproof polyurethane coating - Red interior liner improves internal visibility MOUNTING SYSTEM - Lightweight Velcro saddle-mounting system ADDED BENEFIT - Zippered flap opening for easy access to bag contents while bag is on bike - Zippered side pockets do not impede leg movement, and are ideal for phone, keys, CO2, etc. - Interior credit card / ID pocket - Integrated waterbottle holder - Ultra-visible 3M triangle logo - LED light clip Volume 2.8 L / 173 cu in Weight 214g / 0.47 lbs
Weighing next to nothing and unusually practical, the Cockpit-Pack helps to secure your personal fuel supply by giving you direct, one-handed access to your favorite snack while you continue to ride. The large opening ensures that you'll immediately find what you need. Whether you want quick access to your snack, smartphone or camera, they can all be optimally stowed in the Cockpit-Pack. Thanks to the stiffened material on the inside, the bag retains its shape at all times and can be easily opened and closed. The 82-gram, lightweight Cockpit-Bag is waterproof and attaches easily with its extra strong Velcro straps to your top tube and head tube or to your top tube and seat tube. - Waterproof Cockpit-Pack with zipper - Ideal pack for bikepacking, alp crossing, bike races and trekking tours - Light weight, sturdy PU laminated rip stop nylon fabric - Allows quick access e.g. to mobile phone or snack - Easy to open with one hand (internal stiffener) - Strong hook and loop fasteners for mounting to top tube, head tube or seat tube - Can be mounted to carbon frames - Maximum capacity: 1 kg/2.2 lbs. - Fits on MTBs (full-suspension and hardtails), road bikes and hybrid bikes - Can also be attached to your top tube and seatpost
Want to bikepack without breaking the bank? Banjo Brothers to the rescue. A huge seat-mounted pack for bikepacking and commuting - no rack required. Usable capacity between 800 cu in and 350 cu in. 800 cu in (13L) – 22 x 7 x 6.25. Can be compressed down to 350 cu in when full capacity not needed. Rigid hull inside front of bag for secure support even when bag isn’t full. Removable waterproof liner. Requires a gap between saddle rails and fender of at least 8". - Weight: 2 lbs - Dimensions: 22.0"L 7.0" H x 6.25" W - Capacity: 800 cubic inches / 13L - Removable waterproof liner. - Requires a gap between saddle rails and tire of at least 8". - Imported
A high-volume under-the-seat bag and water bottle pocket designed specifically for the gran fondo cyclist. Every Seymour bag is created using Oceanweave – Axiom’s new lightweight and durable fabric made from reclaimed fishnet – to help reduce the amount of harmful plastics in our oceans. CONSTRUCTION - OCEANWEAVE 600D recycled fishnet polyester with waterproof polyurethane coating - Red interior liner improves internal visibility MOUNTING SYSTEM - Lightweight Velcro saddle-mounting system ADDED BENEFIT - Zippered flap opening for easy access to bag contents while bag is on bike - Interior credit card / ID pocket - Integrated waterbottle holder - Ultra-visible 3M triangle logo - LED light clip - Volume 1.3 L / 79 cu in - Weight 126g / 0.28 lbs
Page 1 of 6 Next page