Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands

Parts & Accessories

Specialized Stix Fabric Clip Mount
$5.00
Stick a Stix on it. This fabric clip mount makes it a cinch to clip your Specialized Stix to a bag, jacket, or jersey for on-the-go visibility. - Stainless steel spring clip for secure mounting.
Specialized Stix Helmet Strap Mount
$5.00
Easily mount the Specialized Stix to your helmet with this Stix Helmet Strap mount that attaches securely through your helmet's vents. - Allows Stix light to be mounted horizontally or vertically. - Includes hook-and-loop strap to securely mount to helmet through vents.
Serfas Aero Tail Light Bracket
$6.00
Replacement Part – Aero Tail Light Bracket - Works For Both Headlight & Tail Lights - Great For Helmet Application - 3 Strap Sizes Allows Fitting From 20mm To Over 100mm - Adjusts To Fit Aero & Round Seat Posts & Handlebars Compatible With: TST-70 TST-100 TST-150 TBT-50R TBT-120F
Serfas Universal Handlebar Bracket
$8.00
Replacement Part – Universal Handlebar Bracket - Fits all current Serfas headlights with a removable bracket - Fits bars up to 31.8mm horizontal & vertical adjustable - Easily removes from bar in seconds - No tools needed - Works With: TSL-100, TSL-150, TSL-150+, TSL-200, TSL-250, TSL-250+, TSL-500, TSL-500+, TSL-1000, TSL-1500, SL-155, SL-255, USL-155, USL-305, USL-505, TSL-350, TSL-550, TSL-750, TSL-T1000, TSL-LT1000, TSL-1200, TSL-1800, TSL-2500, HL-1.1, & SL-30WP - Works for all Serfas headlights EXCEPT for SL-200 & SL40WP
Serfas Universal Tail Light Bracket Adapter
$5.99
Replacement mounting bracket for Serfas tail lights. - Fits TL-411 & TL-200 models
Portland Design Works Tail Light Rack Bracket
$4.99
Mount your tail light to the reflector tab on the back of a rear cargo rack with this Rack Bracket from Portland Design Works. - Compatible with all PDW rear lights except the Asteroid and Fenderbot - Horizontal holes are 50mm apart to fit European rack standards - Vertical holes are 18mm apart to fit most reflector mounts
No Image
$5.99
- Attaches to rear racks - Compatible with: Blinky 3,5,7 and Superflash - 25mm between each of the top horizontal holes (center to center) - Requires an "L bracket" that typically comes with a rear rack. If your rack is missing the L bracket, you can purchase Planet Bike's rack hardware pack
Light & Motion Urban/Deckhand GoPro Mount
$10.00
Setup your Light & Motion Urban or Deckhand light (sold separately) wherever you can connect a GoPro mount. Use this adapter to connect your Urban or Deckhand to any GoPro mounting option.
CatEye Rear Bracket
$5.99
Optional Accessory Rear rack Bracket for mounting most CatEye Taillights to rear racks with 50/80 mm spaced mounting holes.
Bontrager Blendr Road Ion Light Mount
$12.99
Blendr is the ultimate integration system for clean and easy installation of lights, computers, and other accessories. Start with a Blendr stem, add the appropriate base, and finish with the Blendr Road Ion Light Mount for a clean, flush look that securely holds your Bontrager Ion light in a perfect position to see and be seen. Key features: - Blendr is an elegant, integrated accessory mounting solution - Provides clean and secure mount for Bontrager Ion headlights - Works with any Blendr-compatible stem and the accompanying base - For use with Blendr bases (Pro, XXX, XXX bar/stem, and select Elite bases)
Bontrager Blendr Saddle Accessory Mount
$6.50
The Bontrager Blendr Saddle Mount makes riding safe easier than ever. All you need are two secure bolts to easily and cleanly attach compatible Bontrager Flare tail lights so you can always be seen when you ride. - Blendr mount allows for integrated rear light attachment - Easily and securely mounts to compatible saddles - Includes mounting hardware (2—3mm M5 bolt) - Torque included M5 mounting hardware to 2Nm
Bontrager Flare Rack Quick Mount Kit
$4.99
Product details - Perfect for mounting compatible Flare taillights to rear rack - Includes a bolt and star washer for extra security - Easiest to install with light installed for better leverage
Bontrager High Ion Light Mount for Blendr
$19.99
Blendr is the ultimate integration system for clean and easy installation of lights, computers, and other accessories. Start with a Blendr stem, add the appropriate base, and finish with the Blendr High Ion Light Mount for a clean, flush look that securely holds your Bontrager Ion light above your stem to see and be seen. Key features: - Blendr is an elegant, integrated accessory mounting solution - Provides clean and secure mount for Bontrager Ion headlights - Works with any Blendr-compatible stem and the accompanying base - For use with Blendr bases (Pro, XXX, XXX bar/stem, and select Elite bases)
Bontrager Ion Hard-Mount Bracket
$9.99
Key features: - Securely attaches all Ion lights to bars - Reduces vibration and slippage - Compatible with 22.2-31.8mm diameter bars - Mount rotates left and right for optimal placement
Bontrager Light Bracket - SyncV2
$7.50
Product details - Compatible with USB rechargeable Flare taillights and all Ion headlights - Fits handlebars/seatposts 22.2-35mm and Ride Tuned Seatmast Caps - Silicone body with a tooled adjustment clamp diameter - When rotated for a Flare, the bracket is angled to compensate for an angled seat tube - 25g
Bontrager Quick Connect Light Brackets
$4.99
Quick, easy straps for your Flare and Ion lights Product details (Front - Ion) - Fits all Ion headlights - Works best with 22.2 - 35.0mm handlebars Product details (Rear - Flare) - Fits all Flare tail lights - Works best with 27.2 - 31.6mm seatposts - Includes 16 degree offset for optimized use on seatposts
Bontrager Transmitr Remote
$49.99
Welcome to the future The Transmitr Remote wirelessly controls up to seven Transmitr ready devices. It easily attaches to any bike's handlebars for convenient on the bar control of all Transmitr lights. The ANT+ enabled Transmitr remote is compatible with all Transmitr products and allows for wireless on/off, mode selection, real time light battery status, and more. - Transmitr remote can simultaneously control up to 7 lights - ANT+ enabled for use with all Transmitr products - Use Transmitr system for wireless on/off, mode selection, and more - Can be used with multiple Flare RT lights for turn signal configuration - Includes CR2032 battery, mount, and quick-start manual
TwoFish Twofish Flashlight Holder
$5.95
- Mounts most AA flashlights to handlebars and helmets - Ideal low-cost lighting alternative for cyclists
Trek Speed Concept Seatpost Reflector/Flare Mount
$2.99
Key features - Reflector mount for first and second generation Speed Concept seatposts - To use with a Bontrager Flare, use with the Bontrager Flare Horizontal Mounting Kit (sold separately)
Topeak BarXtender
$24.95
Gain more room or find the perfect position for lights, computers, music players, GPS, or whatever, with the Topeak BarXtender. Attaches securely to the handlebars or stem and adjusts for optimum position. - Clamp: Fits 22-38 mm tubes (shims included) - Crossbar: Device mount bar 25.4 mm - Material: Engineering Grade Plastic and Steel - Mount: Handlebar, Handlebar Stem - Size (L x W x H): 18 x 3 x 3 cm, 7.1” x 1.2” x 1.2” (folded) - Size (L x W x H): 13 x 10 x 3 cm, 5.1” x 3.9” x 1.2” (open) - Weight: 116 g / 4.08 oz
Topeak DP Mount
$24.95
Solid aluminum dropper post mount to attach rear bikepacking bag, larger saddle bag, bottle cage, tail light, and more.
Topeak UTF Multi-Mount
$44.95
Up-To-Front Multi-Mount aligns everything to be mounted front and center for viewing convenience and to easily capture those precious ride moments, track your ride, and illuminate your way home from your adventure. Includes adapters for mounting GoPro/Shimano Sport Cameras, Garmin Edge/Wahoo/Sigma GPS cycle computers, Topeak CubiCubi front lights, WhiteLite HP 500, WhiteLite 800BT, and other GoPro-mount-compatible devices. Flipflop mounts can be positioned to customize device viewing height so you can be focused and enjoy your ride! - Material: Forged aluminum / Engineering grade polymer - Modular Multi-Mount: Adapters included for GoPro / Shimano Sport Cameras, Garmin Edge / Wahoo / Sigma - Device: GPS cycle computers, Topeak CubiCubi front lights, WhiteLite 800 BT, and WhiteLite HP 500 - Bracket: Fits 25.4 – 31.8mm handlebars (shims included) - Max Load: 480g / 16.93oz - Added Features: Angle adjustment (Sport Camera), Rotates for landscape or portrait viewing (RideCase) - Weight: 52g / 1.83oz - Size: 12.5 x 6.6 x 4.3cm / 4.9" x 2.6" x 1.7"
Topeak UTF Multi-Mount for Integrated Handlebars
$39.95
An innovative cycle computer/action camera center mount, specifically designed for integrated stem/handlebar systems. Various mounting positions for Garmin Edge/Wahoo/Sigma GPS cycle computers and GoPro/Shimano sport cameras, Topeak CubiCubi front lights, WhiteLite HP 500, WhiteLite 800 BT, and other GoPro-mount-compatible devices. - Compatible Devices: Garmin Edge / Wahoo / Sigma GPS bike computer / GoPro action cams and other devices with GoPro mount - Handlebar Compatibility: Shimano Pro Stealth, FSA Plasma, Ritchey WCS Solostream, SCOTT SYNCROS RR1.0 Carbon Aero 420, Most Talon, Canyon H31 & CP series - Material: aluminum / fiberglass composite - Max load: 220g - Weight: 40g (120mm) / 45g (150mm) - Dimensions: 12 x 3.5 x 3cm (120mm) / 15 x 3.5 x 3cm (150mm)
Sunlite Replacement Light Straps
$4.99
- Replacement mounting straps for Sunlite lights - Choose specific model to fit your light
Sunlite TL-L225 Bracket
$4.19
- Rack mount bracket only - Fits TL-L225 taillight
Specialized 2amp International USB Charger
$40.00
2amp charger for the fastest charging possible of Specialized Flux lights - Has 2 standard size USB ports and will charge most USB devices. - Includes 4 interchangeable wall plug options and USB A to USB MINI B male to male charge cable. - Output: 10.5W 5V 2.1A Max Input: 100-204V AC 50/60Hz. 260mA
Specialized Flux 900 Headlight Handle Bar Mount
$25.00
Do you have more than one bike? Get the most out of your Flux 900 headlight by getting an additional handlebar mount for easy switching between your rides. - Includes one piece axle and handlebar clamp. - The clamp will fit 25.4mm and 31.8mm bar diameters with included rubber grip pads.
Specialized Flux 900/1200 Headlight Helmet Mount
$20.00
Looking to take your second-generation Flux headlight off-road? You're going to need a helmet mount. - Breakaway design prevents snagging on overhead objects - Hook-and-loop strap can be reoriented 90 degrees to give additional mounting options - Fore/aft adjustability for optimal placement regardless of helmet vents - Action camera style hinge works with third-party mounts
Specialized Flux Elite Headlight Handle Bar Mount
$19.95 $30.00 On Sale
All the parts needed to mount a Flux Elite headlight to a second bike. - Includes axle, handlebar clamp, stainless screws and 3mm Allen key. - The clamp will fit 25.4mm and 31.8mm bar diameters with included rubber grip pads.
Specialized Flux Expert Headlight Lens
$20.00
Replacement lens for Flux Expert Headlight. - Includes clear lens and gasket.
Page 1 of 5 Next page